INFRARED DIESEL HEATER 28,000KCAL – VAL6-KBE1S

$3699.00

One of the most popular diesel heaters worldwide is the VAL6 range that offer technically advanced heating systems which burn the fuel at 100%. This means high energy savings and no odour. The VAL6-KBE1S is a 32.5KW / 110,890 BTU heater that is used extensively in multiple applications where sunlight type heat is required and are extremely easy to start and move around. The VAL6-KB1ES heater is ideal for spot heating in large open areas. Japanese made.

Part No. VAL6-KBE1S
Heat Output - (KW)/(kcal/h) 32.5 / 28,000
Voltage 240
Plug Connection 3 Pin 10amp
Fuel Type Diesel or Kerosene
Heat Settings 1
Tank Size (L) 35
Fuel Consumption (L/H) 2.67
Product Dimensions (mm) 732x655x825
Weight (KG) 38
  • Check your diesel fuel is clean
  • In colder regions you may have more issues with diesel fuel solidifying causing blockages in fuel lines and nozzles, blending a mixture of Kerosene essentially helps thin out the fuel creating less blockage
  • Try not to leave your heater out in the cold after use, cover it with a tarp or blanket which will help melt the fuel lines stopping any blockages
  • After winter try not to leave any diesel in the tank, use it all up and drain out of the tank and cover it with a tarp or blanket and store it away
  • Maintenance is key, ensure your maintaining your heater a minimum twice a year – check, clean or replace fuel nozzle, fuel line, fuel filter, air line & fuel pump.

One of the most popular diesel heaters worldwide is the VAL6 range that offer technically advanced heating systems which burn the fuel at 100%. This means high energy savings and no odour. The VAL6-KBE1S is a 32.5KW / 110,890 BTU heater that is used extensively in multiple applications where sunlight type heat is required and are extremely easy to start and move around. The VAL6-KB1ES heater is ideal for spot heating in large open areas. Japanese made.

Weight 28 kg

Reviews

There are no reviews yet.

  • This field is hidden when viewing the form
  • This field is for validation purposes and should be left unchanged.